✏️ Job Creation
In the main window of Marso, the topmost panel is used to create new jobs.
Before continuing, make sure you have selected an Exposure and Light System.
To create a new job you will need to enter:
Job Name: A descriptive name that will be used to identify the scan throughout processing and once the results are ready. e.g Blue_Leather_Handbag
| Info |
|---|
Letters, numbers, hyphens, and underscores are allowed. Do not use special characters. Names do not need to be unique. |
Raw FilesImages Folder: Specify the path to the raw images from the scan to be processed.
Raw Images Extension: Select from the list of supported file formats found in the Raw Images Folder.
| Note |
|---|
Marso can only ingest camera |
Select Start to begin preparing the images for processing. This may take up to an hour.
📷 Image Preparation
Image preparation is necessary to create ensure the photogrammetry images are consistent with the processing data.
After clicking starting the preparation step you will see the job appear in the job list below. If you need to stop the running job you can click the Stop, although any progress will be lost.
| Note |
|---|
If the prepare process fails, first ensure that the selected Exposure Calibration is correct. |
The prepare stage has completed successfully when you see the status READY:
In addition to reading all data into Maraso, this step will also create exr files that must be used for the photogrammetry step. Click Inspect Photos to view these images
exr file for each camera position.Light System: Describes the relative position of the lights to the camera. These are presets that can be re-used for different jobs if the same scanning setup is being used. See Calibration Section for more information.
Click Create to add the new job to the job list.
A confirmation will be displayed for you to check the number of images, the extension, and the images directory.
