/
Calibration
Calibration
- Elliott Round
- Nathan Dunne
Owned by Elliott Round
Before you can process any data, you will need to create a Calibration profile for your Camera and Light-Setup. You should only need to do this once per scanner, but it would be recommended to create a new exposure calibration if you are to drastically change your Camera’s parameters between scanning sessions to ensure consistent results.
Should the exposure settings change or flash brightness, a new calibration will be required.
If you haven’t captured the relevant calibration photography, please read this guide here.
Exposure Calibration
This process will ensure that RAW photography has the correct exposure . .
Light-Setup
This process will ensure that RAW photography has the correct exposure . .