It is time to capture your subject. Remember to check the Capture Requirements, and save your photography to a single directory.
| Note |
|---|
If you also captured a calibration image, move it out of the photography directory, otherwise it will interfere with results. |
Once you have captured your subject, a Job needs to be created in Marso to represent this capture.
Create Job
In Marso, you can now input your capture photography by creating a job. The top-most panel of the main window is used for this:
Enter the job information:
Job Name: A descriptive name that will be used to identify the scan throughout processing and once the results are ready. e.g Blue_Leather_Handbag
| Info |
|---|
Letters, numbers, hyphens, and underscores are allowed. Do not use special characters. |
Raw Images Folder: Specify the path to the raw images from the scan to be processed.
Raw Images Extension: Select from the list of supported file formats found in the Raw Images Folder.
| Note |
|---|
Marso can only ingest camera |
Light System: Describes the relative position of the lights to the camera. These are presets that can be re-used for different jobs if the same scanning setup is being used. See Calibration Section for more information.
Click Create to add the new job to the job list.
A confirmation dialog will be displayed. Check the number of images and the raw extension is as expected before proceeding.
To continue you will need to run the initial DEVELOP step, to create photogrammetry images, and
⬅️ Setup